How To Repair A Water Damaged Cell Phone

Learn how to save your cell phone when it gets water-logged. The next time when your get your cell phone soaked in water, tea or coffee, just remember and follow these simple and easy first aid measures. You will be more than happy and surprised to see your priceless mobile phone or ipod in working condition. You won't get frustrated of running around repair centers if you follow these simple tips.

Most people don't know the basic steps to avoid a wet cellular phone from getting damaged. The most important thing is to follow the procedure to avoid damages to the circuit board (PCB) of the cell phone as it is what an engine is to a car. Preventing damage to the PCB should be the main aim as you lose warranty on the handset due to water-logging and in such cases most of the service centers don't provide a new circuit board and it is also not available in the open market.

Steps to repair and fix a water damaged cell-phone:

Remove the battery immediately and don't just switch-off the handset. The removing of the battery is a must.
Now dismantle your cell phone carefully. To open your cell phone you need a torx T6 size screw driver and a tweezer. Remember the steps how you opened the phone as you will have to assemble it later!
Dry the green coloured circuit board carefully and completely to avoid breakage. Use a hair drier or you can also dry it in sunlight or on the top of a TV or a computer monitor.
Dry the spare parts and components carefully. Be careful with the LCD as it is very delicate and fragile.
Clean the circuit board with spirit using a tooth brush. This avoid and prevents corrosion on the PCB.

Now re-assemble your phone carefully and if all goes well, your cell phone should switch on without any hassles. If it fails to switch on, charge your handset and try again. If it doesn't switch on now, luck is not on your side. You will have to get your phone repaired at a service center.

Note: If you are scared and cannot summon courage to do it yourself